DR-120
Winston
Made in China
Export standard carton box
PCS
10
3-7days
1
T/T
Model | DR-120-12 | DR-120-24 | DR-120-48 | |
output | DC voltage | 12V | 24V | 48V |
Voltage tolerance | ±2% | ±1% | ±1% | |
Rated current | 8.3A | 5A | 2.5A | |
Current range | 0~8.3A | 0~5A | 0~2.5A | |
Rated power | 99.6W | 120W | 120W | |
Ripple&noise | 100mvp-p | 120mvp-p | 150mvp-p | |
DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | |
input | Voltage range | 90~264VAC,127~373VDC | ||
frequency | 47~63HZ | |||
AC current | 2.6A/110VAC,1.6A/220VAC | |||
efficiency | 82% | 84% | 85% | |
Inrush current | Cold start current 25A/110VAC,45A/220VAC | |||
Leakage current | < 1mA/240VAC | |||
protection | Over load | Rated output power105%~135% start over load protection | ||
protection type :rated current limit ,auto-recovery after fault condition is removed | ||||
over voltage | 15.6~17.8V | 30.6~33.2V | 54.8~56.6V | |
protection type:cutoff output,recovery after restart power | ||||
environment | Working temp,humidity | -20℃~+60℃,20%~90%RH | ||
Storagetemp,humidity | -40℃~+85℃,10%~95%RH non-condensing | |||
Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes | |||
safety | Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC | |||
Fitstandard | Safety standard | Fit UL1012 | ||
EMC standard | EN55022,CLASSA | |||
others | Dimension | 65.5*125.2*100mm (L*W*H) | ||
Weight/packing | 0.8kg/20pcs/17kg/0.046m³/1.64CUFT | |||
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
Model | DR-120-12 | DR-120-24 | DR-120-48 | |
output | DC voltage | 12V | 24V | 48V |
Voltage tolerance | ±2% | ±1% | ±1% | |
Rated current | 8.3A | 5A | 2.5A | |
Current range | 0~8.3A | 0~5A | 0~2.5A | |
Rated power | 99.6W | 120W | 120W | |
Ripple&noise | 100mvp-p | 120mvp-p | 150mvp-p | |
DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | |
input | Voltage range | 90~264VAC,127~373VDC | ||
frequency | 47~63HZ | |||
AC current | 2.6A/110VAC,1.6A/220VAC | |||
efficiency | 82% | 84% | 85% | |
Inrush current | Cold start current 25A/110VAC,45A/220VAC | |||
Leakage current | < 1mA/240VAC | |||
protection | Over load | Rated output power105%~135% start over load protection | ||
protection type :rated current limit ,auto-recovery after fault condition is removed | ||||
over voltage | 15.6~17.8V | 30.6~33.2V | 54.8~56.6V | |
protection type:cutoff output,recovery after restart power | ||||
environment | Working temp,humidity | -20℃~+60℃,20%~90%RH | ||
Storagetemp,humidity | -40℃~+85℃,10%~95%RH non-condensing | |||
Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes | |||
safety | Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC | |||
Fitstandard | Safety standard | Fit UL1012 | ||
EMC standard | EN55022,CLASSA | |||
others | Dimension | 65.5*125.2*100mm (L*W*H) | ||
Weight/packing | 0.8kg/20pcs/17kg/0.046m³/1.64CUFT | |||
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |