S-75 Single output switching power supply

 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             

Model	S-75-5	S-75-12	S-75-15	S-75-24
Specification
DC output voltage	5V	12V	15V	24V
Output voltage range (Note:2)	±2%	±1%	±1%	±1%
Rated output current	12A	6A	5A	3.2A
Output current range	0-12A	0-6A	0-5A	0-3.2A
Wave and noise(note:3)	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability(note:4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(note:5)	±1%	±0.5%	±0.5%	±0.5%
DC output power	60W	75W	75W	76.8W
Efficiency(Typ.)	71%	78%	78%	82%
Adjustable range for DC voltage	+10,-5%	±10%	±10%	±10%
AC input voltage range	85~264VAC 47~63Hz;120~370VDC
Input current	1.6A/115V 0.8A/230V
AC Inrush current	Cold-start current 18A/115V 36A/230V
Leakage current	﹤3.5 mA/240VAC
Overload	105%~150% Type:pulsing hiccup shutdown Reset:auto recovery
Over-voltage protection	105%-135%
High-voltage protection	……
Temp coefficient	±0.03%/℃(0-50℃)
Setup, rise, hold up time	200ms,100ms,30ms at full load
Vibration	10~500Hz,2G 10min,/1cycle,Period for 60min,Each axes
Withstand voltage	Input and output intemal: 1.5KvAC,Input and enclosure: 1.5KvAC Output and enclosure: 0.5KvAC
Isolation resistance	Input and output intemal, Input and enclosure, Output and enclosure: 500VDC/100MΩ
Working temp., humidity	-10℃~+60℃(Refer to output derating curve),20%~90%RH
Storage temp., humidity	-20℃~+85℃.10%~95%RH
Dimension	157×97×38mm(L*W*H)
Weight	0.5Kgs
Safety standards	Meet UL 1012 requirement(Not apply for the mark)
EMC standards	Meet FCC PART 15J Conduction class B
Note:1.The testing condition for the paramenter above is: 230 VAC input, rated load, 25 ℃ 70% Rh, temperature.
2.Error.include the setting error.line stability and load stability.(Note:5)
3.Wave test:adopting “A12”double wire for 20MHz，and 0.1UF&0.47UF capacitor short-circuit for interrupting
4.Intel voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:The load is from 0% to 100%.