Availability: | |
---|---|
Quantity: | |
UB2000-30GM-I-V1
Winston
Ultrasonic Sensor 30m Analog Output 4 - 20mA (UB2000-30GM-I-V1)
Technical Parameters
UB2000-30GM-I-V1 | ||||||||
Technical data | ||||||||
Sensing distance | 80…2000mm | |||||||
Adjustment range | 120…2000mm | |||||||
Unusable area | 0…80mm | |||||||
Standard target plate | 100mm×100mm | |||||||
Transducer frequency | About 180kHz | |||||||
Response delay | About 195ms | |||||||
Indicators/Operating means | ||||||||
LED blue | Power on | |||||||
LED yellow | indication of the switching state Flashing: program function object detected | |||||||
LED red | permanently red: Error Red,flashing: program function,object not detected | |||||||
Electrical specifications | ||||||||
Operating voltage UB | 10…30VDC,ripple10%ss | |||||||
No-load supply current | ≤900mV | |||||||
Output | ||||||||
Output type | 1 analogue output 4…20mA | |||||||
Resolution | evaluation range [mm]/4000, but ≥ 0.35 mm | |||||||
Deviation of the characteristic curve | ≤0.2% of full-scale value | |||||||
Repeat accuracy | ≤0.1% of full-scale value | |||||||
Load impedance | 0...500Ohm | |||||||
Temperature influence | ≤2% from full-scale value | |||||||
Mechanical specifications | ||||||||
Protection grade | IP67 | |||||||
Connection | connector(M12×1),4-pin | |||||||
Material Housing | brass,nickel-plated | |||||||
Transducer | epoxy resin/hollow glass sphere mixture; Polyurethane foam | |||||||
Packaging & Shipping
Ultrasonic Sensor 30m Analog Output 4 - 20mA (UB2000-30GM-I-V1)
Technical Parameters
UB2000-30GM-I-V1 | ||||||||
Technical data | ||||||||
Sensing distance | 80…2000mm | |||||||
Adjustment range | 120…2000mm | |||||||
Unusable area | 0…80mm | |||||||
Standard target plate | 100mm×100mm | |||||||
Transducer frequency | About 180kHz | |||||||
Response delay | About 195ms | |||||||
Indicators/Operating means | ||||||||
LED blue | Power on | |||||||
LED yellow | indication of the switching state Flashing: program function object detected | |||||||
LED red | permanently red: Error Red,flashing: program function,object not detected | |||||||
Electrical specifications | ||||||||
Operating voltage UB | 10…30VDC,ripple10%ss | |||||||
No-load supply current | ≤900mV | |||||||
Output | ||||||||
Output type | 1 analogue output 4…20mA | |||||||
Resolution | evaluation range [mm]/4000, but ≥ 0.35 mm | |||||||
Deviation of the characteristic curve | ≤0.2% of full-scale value | |||||||
Repeat accuracy | ≤0.1% of full-scale value | |||||||
Load impedance | 0...500Ohm | |||||||
Temperature influence | ≤2% from full-scale value | |||||||
Mechanical specifications | ||||||||
Protection grade | IP67 | |||||||
Connection | connector(M12×1),4-pin | |||||||
Material Housing | brass,nickel-plated | |||||||
Transducer | epoxy resin/hollow glass sphere mixture; Polyurethane foam | |||||||
Packaging & Shipping