UB4000-30GM-E4-V1
CE
Winston
Made in China
Export standard carton box
PCS
1
Within 6days after get payment
6
T/T
Brife introduction of ultrasonic sensor
Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may affect the sensors. Objects consisting of a variety of materials can be detected to within millimeters regardless of color or shape.
The ultrasonic sensor produces a data carrier utilizing very high frequencies that are outside the human’s audible range. The time it takes for that ultrasonic wave to pass between the sensor and the object is the value for the distance or the position.
Ultrasonic sensors have proven their reliability and precision in many industries and applications, including:
Brife introduction of ultrasonic sensor
Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may affect the sensors. Objects consisting of a variety of materials can be detected to within millimeters regardless of color or shape.
The ultrasonic sensor produces a data carrier utilizing very high frequencies that are outside the human’s audible range. The time it takes for that ultrasonic wave to pass between the sensor and the object is the value for the distance or the position.
Ultrasonic sensors have proven their reliability and precision in many industries and applications, including:
Technical data |
General Specifications |
Sensing distance 200…4000mm |
Adjustment range 240…4000mm |
Unusable area 0…200mm |
Standard target plate 100mm×100mm |
Transducer frequency About 85kHz |
Response delay About 325ms |
Indicators/Operating means |
LED blue Power on |
LED yellow indication of the switching state Flashing:program function object detected |
LED red permanently red: Error Red,flashing:program function,object not detected |
Electrical specifications |
Operating voltage UB 10…30VDC,ripple10%ss |
No-load supply current ≤50mA |
Input |
Input type 1 TEACH-IN input Operating distance A1:-UB…+1V,operating distanceA2:+6… + UB Input impedance:>4.7KΩ TEACH-IN programmable pulse :≥1S |
Output |
Output type 1 switch output E4,NPN NO/NC,programmable |
Rated operational current 200mA,short-circuit/overload protected |
Default setting Switching point A1:70mm Switching point A2: 800mm |
Voltage drop ≤ 2.5V |
Repeat accuracy ≤ 1% |
Switching frequency f ≤ 13HZ |
Range hysteresis H 2% of the set operating distance |
Temperature influence ± 1.5% of full-scale value |
Ambient conditions |
Ambient temperature -25…70°C(248...343K) |
Storage temperature -40…85°C(233...358K) |
Mechanical specifications |
Protection grade IP67 |
Connection V1 connector(M12×1),4-pin |
Material Housing brass,nickel-plated |
Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane,cover PBT |
Dimensions
TEACH-IN window mode,normally-open function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Set target to far switching point -TEACH-IN switching point A2 with + UB | |||
TEACH-IN window mode,normally-closed function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Set target to far switching point -TEACH-IN switching point A1 with - UB | |||
| |||
TEACH-IN switching point, normally-open function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB | |||
| |||
TEACH-IN switching point, normally-closed function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A2 with + UB | |||
TEACH-IN detection of objects presence -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB -TEACH-IN switching point A2 with + UB | |||
Default setting of switching point A1=blind range,A2=nominal distance | |||
LED displays | |||
Displays in dependence on operating mode | Red LED | Yellow LED | |
TEACH-IN switching point Object detected No object detected Object uncertain(TEACH-IN invalid) |
off flashes On |
flashes off off | |
Normal operation | off | Switching state | |
Fault | on | Previous state |
Curve1:flat surface 100mm×100mm
Curve2:round bar,Φ25mm
Installation conditions
If the sensor is installed at the environment temperature fall below 0°C,It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.
Technical data |
General Specifications |
Sensing distance 200…4000mm |
Adjustment range 240…4000mm |
Unusable area 0…200mm |
Standard target plate 100mm×100mm |
Transducer frequency About 85kHz |
Response delay About 325ms |
Indicators/Operating means |
LED blue Power on |
LED yellow indication of the switching state Flashing:program function object detected |
LED red permanently red: Error Red,flashing:program function,object not detected |
Electrical specifications |
Operating voltage UB 10…30VDC,ripple10%ss |
No-load supply current ≤50mA |
Input |
Input type 1 TEACH-IN input Operating distance A1:-UB…+1V,operating distanceA2:+6… + UB Input impedance:>4.7KΩ TEACH-IN programmable pulse :≥1S |
Output |
Output type 1 switch output E4,NPN NO/NC,programmable |
Rated operational current 200mA,short-circuit/overload protected |
Default setting Switching point A1:70mm Switching point A2: 800mm |
Voltage drop ≤ 2.5V |
Repeat accuracy ≤ 1% |
Switching frequency f ≤ 13HZ |
Range hysteresis H 2% of the set operating distance |
Temperature influence ± 1.5% of full-scale value |
Ambient conditions |
Ambient temperature -25…70°C(248...343K) |
Storage temperature -40…85°C(233...358K) |
Mechanical specifications |
Protection grade IP67 |
Connection V1 connector(M12×1),4-pin |
Material Housing brass,nickel-plated |
Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane,cover PBT |
Dimensions
TEACH-IN window mode,normally-open function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Set target to far switching point -TEACH-IN switching point A2 with + UB | |||
TEACH-IN window mode,normally-closed function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Set target to far switching point -TEACH-IN switching point A1 with - UB | |||
| |||
TEACH-IN switching point, normally-open function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB | |||
| |||
TEACH-IN switching point, normally-closed function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A2 with + UB | |||
TEACH-IN detection of objects presence -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB -TEACH-IN switching point A2 with + UB | |||
Default setting of switching point A1=blind range,A2=nominal distance | |||
LED displays | |||
Displays in dependence on operating mode | Red LED | Yellow LED | |
TEACH-IN switching point Object detected No object detected Object uncertain(TEACH-IN invalid) |
off flashes On |
flashes off off | |
Normal operation | off | Switching state | |
Fault | on | Previous state |
Curve1:flat surface 100mm×100mm
Curve2:round bar,Φ25mm
Installation conditions
If the sensor is installed at the environment temperature fall below 0°C,It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.