T-30
Winston
Made in China
Export standard carton box
PCS
10
3-7days
1
T/T
Model Specification | T-30A | T-30B | ||||
CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | |
DC output voltage | 5V | 12V | -5V | 5V | 24V | -12V |
Output voltage error(Note:2) | ±2% | +2,-6% | +2,-10% | ±2% | +2,-10% | ±6% |
Rated output current | 3A | 1A | 0.5A | 3A | 1A | 0.5A |
Output current rage | 0.5-3A | 0.1-1A | 0.1-0.5A | 0.5-3A | 0.1-1A | 0.1-0.5A |
Wave and noise(Note :3) | 50mVp-p | 100mVp-p | 50mVp-p | 50mVp-p | 100mVp-p | 100mVp-p |
Inlet stability(Note :4) | ±0.5% | ±1% | ±1% | ±0.5% | ±1% | ±1% |
Load stablity (Note :5) | ±0.5% | ±5% | ±5% | ±0.5% | ±5% | ±5% |
DC output power | 30W | 33W | ||||
Efficiency | 70% | 72% | ||||
Adjustable range for DC voltage | CH1;+10,-5% | CH1:+10,-5% | ||||
AC input voltage range | 85-132VAC/170-264VAC selected by switch 47-63Hz;240-370VDC | |||||
Input current | 0.8A/115V 0.45A/230A | |||||
AC INnrush current | Cold-start current35A | |||||
Leakage current | <0.5mA/240VAC | |||||
Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||
Over-voltage protection | ………… | |||||
High-temperature protection | ………… | |||||
Temperature coefficient | ±0.03%/℃(0-50℃) | |||||
Setup rise hold up time | 200ms,100ms,30ms | |||||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||||
Store temperature and humidity | -20℃~+85℃。10%~95%RH | |||||
Overall dimension | 129×98×38mm | |||||
Weight | 0.4Kgs | |||||
Safety standards | Meet UL 1012R requirement (Not apply for the mark) | |||||
EMC standards | Meet FCC Part15 J Conduction class A | |||||
Note: 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. |
Model Specification | T-30A | T-30B | ||||
CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | |
DC output voltage | 5V | 12V | -5V | 5V | 24V | -12V |
Output voltage error(Note:2) | ±2% | +2,-6% | +2,-10% | ±2% | +2,-10% | ±6% |
Rated output current | 3A | 1A | 0.5A | 3A | 1A | 0.5A |
Output current rage | 0.5-3A | 0.1-1A | 0.1-0.5A | 0.5-3A | 0.1-1A | 0.1-0.5A |
Wave and noise(Note :3) | 50mVp-p | 100mVp-p | 50mVp-p | 50mVp-p | 100mVp-p | 100mVp-p |
Inlet stability(Note :4) | ±0.5% | ±1% | ±1% | ±0.5% | ±1% | ±1% |
Load stablity (Note :5) | ±0.5% | ±5% | ±5% | ±0.5% | ±5% | ±5% |
DC output power | 30W | 33W | ||||
Efficiency | 70% | 72% | ||||
Adjustable range for DC voltage | CH1;+10,-5% | CH1:+10,-5% | ||||
AC input voltage range | 85-132VAC/170-264VAC selected by switch 47-63Hz;240-370VDC | |||||
Input current | 0.8A/115V 0.45A/230A | |||||
AC INnrush current | Cold-start current35A | |||||
Leakage current | <0.5mA/240VAC | |||||
Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||
Over-voltage protection | ………… | |||||
High-temperature protection | ………… | |||||
Temperature coefficient | ±0.03%/℃(0-50℃) | |||||
Setup rise hold up time | 200ms,100ms,30ms | |||||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||||
Store temperature and humidity | -20℃~+85℃。10%~95%RH | |||||
Overall dimension | 129×98×38mm | |||||
Weight | 0.4Kgs | |||||
Safety standards | Meet UL 1012R requirement (Not apply for the mark) | |||||
EMC standards | Meet FCC Part15 J Conduction class A | |||||
Note: 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. |