Tamperproof Thermostats (Pre-set) FTO 011 Small size Default temperature settings Easy to install High switching tolerance Tamperproof (Pre-set) Thermostat FTO 011 Contact breaker /NC (red casing) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising. Tamperproof (Pre-set) Thermostat FTS 011 Contact maker /NO (blue casing) for regulating filter fans, heat exchangers, cooling devices or for switching signal devices when temperature limit has been exceeded. The contact closes when temperaure is rising.
Tamperproof Thermostats (Pre-set) FTO 011 Small size Default temperature settings Easy to install High switching tolerance Tamperproof (Pre-set) Thermostat FTO 011 Contact breaker /NC (red casing) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising. Tamperproof (Pre-set) Thermostat FTS 011 Contact maker /NO (blue casing) for regulating filter fans, heat exchangers, cooling devices or for switching signal devices when temperature limit has been exceeded. The contact closes when temperaure is rising.
Technical Data
Sensor element
thermostatic bimetal
Contact type
snap-action contact
Service life
> 100,000 cycles
Max. switching capacity
240V AC, 5 (1.6)A
120 VAC, 10 (2)A
DC 30W
Max. inrush current
AC 10A
Connection
2-pole terminal for 2.5mm², torque 0.8Nm max.
Mounting
clip for 35mm DIN rail, EN 60715
Casing
plastic according to UL94 V-0, light grey
Dimensions
47 x 33 x 33mm
Weight
approx. 30g
Fitting position
variable
Operating/Storage temperature
-40 to +80°C (-40 to +176°F) / -45 to +80°C (-49 to +176°F)
Operating / Storage humidity
max. 90 % RH (non-condensing)
Prot. type
IP20
Approvals
CE
Technical Data
Art. No.
Contact type
Switch-off temperature
Switch-on temperature
01160.0-00
Contact breaker (NC)
+15°C / +59°F (± 5K tolerance)
+5°C / +41°F (± 5K tolerance)
01160.0-01
Contact breaker (NC)
+25°C / +77°F (± 5K tolerance)
+15°C / +59°F (± 5K tolerance)
Switch-on temperature
Switch-off temperature
01161.0-00
Contact maker (NO)
+50°C / +122°F (± 6K tolerance)
+40°C / +104°F (± 7K tolerance)
01161.0-01
Contact maker (NO)
+60°C / +140°F (± 6K tolerance)
+50°C / +122°F (± 7K tolerance)
01161.0-02
Contact maker (NO)
+35°C / + 95°F (± 6K tolerance)
+25°C / +77°F (± 7K tolerance)
Technical drawing
Technical Data
Sensor element
thermostatic bimetal
Contact type
snap-action contact
Service life
> 100,000 cycles
Max. switching capacity
240V AC, 5 (1.6)A
120 VAC, 10 (2)A
DC 30W
Max. inrush current
AC 10A
Connection
2-pole terminal for 2.5mm², torque 0.8Nm max.
Mounting
clip for 35mm DIN rail, EN 60715
Casing
plastic according to UL94 V-0, light grey
Dimensions
47 x 33 x 33mm
Weight
approx. 30g
Fitting position
variable
Operating/Storage temperature
-40 to +80°C (-40 to +176°F) / -45 to +80°C (-49 to +176°F)
