T-50
Winston
Made in China
Export standard carton box
PCS
10
3-7days
1
T/T
Model Specification | T-50A | T-50B | T-50C | T-50D | ||||||||
CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | |
DC output voltage | 5V | 12V | -5V | 5V | 12V | -12V | 5V | 15V | -15V | 5V | 12V | 24V |
Output voltage error(Note:2) | ±2% | ±5% | ±5% | ±2% | ±5% | ±5% | ±2% | ±5% | ±5% | ±2% | ±6% | ±6% |
Rated output current | 3A | 2A | 0.5A | 3A | 2A | 0.5A | 3A | 1.5A | 0.5A | 3A | 1.5A | 0.5A |
Output current rage | 0.6-7A | 0.2-1A | 0.2-1A | 0.6-5A | 0.2-1A | 0.2-1A | 0.6-4A | 0.2-1A | 0.2-1A | 0.6-4A | 0.2-1.2A | 0.2-1.2A |
Wave and noise(Note :3) | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV |
Inlet stability(Note :4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±1% |
Load stablity (Note :5) | ±1% | ±4% | ±4% | ±1% | ±4% | ±4% | ±1% | ±4% | ±4% | ±1% | ±5% | ±5% |
DC output power | 52W | 49W | 50W | 51W | ||||||||
Efficiency | 66% | 69% | 71% | 72% | ||||||||
Adjustable range for DC voltage | CH1;+10,-5% | CH1:+10,-5% | CH1:+10,-5% | CH1:+10,-5% | ||||||||
AC input voltage range | 85-132VAC/170-264VAC由开关选择 47-63Hz,240-370VDC | |||||||||||
Input current | 1.6A/115V 0.8A/230A | |||||||||||
AC INnrush current | Cold-start current 20A/115V 40A/230V | |||||||||||
Leakage current | <0.5mA/240VAC | |||||||||||
Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||||||||
Over-voltage protection | ………… | |||||||||||
High-temperature protection | ………… | |||||||||||
Temperature coefficient | ±0.03%/℃(0-50℃)ON+5V | |||||||||||
Setup rise hold up time | 200ms,50ms,16ms | |||||||||||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||||||||||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||||||||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||||||||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||||||||||
Store temperature and humidity | -20℃~+85℃,10%~95%RH | |||||||||||
Overall dimension | 195×97×38mm | |||||||||||
Weight | 0.54Kgs | |||||||||||
Safety standards | Meet UL 1012 requirement(Not apply for the mark) | |||||||||||
EMC standards | ………… | |||||||||||
Note: |
Model Specification | T-50A | T-50B | T-50C | T-50D | ||||||||
CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | |
DC output voltage | 5V | 12V | -5V | 5V | 12V | -12V | 5V | 15V | -15V | 5V | 12V | 24V |
Output voltage error(Note:2) | ±2% | ±5% | ±5% | ±2% | ±5% | ±5% | ±2% | ±5% | ±5% | ±2% | ±6% | ±6% |
Rated output current | 3A | 2A | 0.5A | 3A | 2A | 0.5A | 3A | 1.5A | 0.5A | 3A | 1.5A | 0.5A |
Output current rage | 0.6-7A | 0.2-1A | 0.2-1A | 0.6-5A | 0.2-1A | 0.2-1A | 0.6-4A | 0.2-1A | 0.2-1A | 0.6-4A | 0.2-1.2A | 0.2-1.2A |
Wave and noise(Note :3) | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV |
Inlet stability(Note :4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±1% |
Load stablity (Note :5) | ±1% | ±4% | ±4% | ±1% | ±4% | ±4% | ±1% | ±4% | ±4% | ±1% | ±5% | ±5% |
DC output power | 52W | 49W | 50W | 51W | ||||||||
Efficiency | 66% | 69% | 71% | 72% | ||||||||
Adjustable range for DC voltage | CH1;+10,-5% | CH1:+10,-5% | CH1:+10,-5% | CH1:+10,-5% | ||||||||
AC input voltage range | 85-132VAC/170-264VAC由开关选择 47-63Hz,240-370VDC | |||||||||||
Input current | 1.6A/115V 0.8A/230A | |||||||||||
AC INnrush current | Cold-start current 20A/115V 40A/230V | |||||||||||
Leakage current | <0.5mA/240VAC | |||||||||||
Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||||||||
Over-voltage protection | ………… | |||||||||||
High-temperature protection | ………… | |||||||||||
Temperature coefficient | ±0.03%/℃(0-50℃)ON+5V | |||||||||||
Setup rise hold up time | 200ms,50ms,16ms | |||||||||||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||||||||||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||||||||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||||||||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||||||||||
Store temperature and humidity | -20℃~+85℃,10%~95%RH | |||||||||||
Overall dimension | 195×97×38mm | |||||||||||
Weight | 0.54Kgs | |||||||||||
Safety standards | Meet UL 1012 requirement(Not apply for the mark) | |||||||||||
EMC standards | ………… | |||||||||||
Note: |