Quantity: | |
---|---|
SP-100
Winston
8504401990
SP-100
Made in China
Export standard carton box
PCS
10
3-7days
T/T,L/C/PAYPAL,WU
Model Specification | SP-100-5 | SP-100-7.5 | SP-100-12 | SP-100-15 | SP-100-24 | SP-100-48 |
DC output voltage | 5V | 7.5V | 12V | 15V | 24V | 48V |
Output voltage error(Note:2) | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% |
Rated output current | 20A | 13.5A | 8.5 | 6.7A | 4.5A | 2.2A |
Output current rage | 0-20A | 0-13.5A | 0-8.5 | 0-6.7A | 0-4.5A | 0-2.2A |
Wave and noise(Note:3) | 100mVp-p | 125mVp-p | 125mVp-p | 125mVp-p | 150mVp-p | 150mVp-p |
Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stablity (Note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
DC output power | 100W | 101W | 102W | 100.5W | 108W | 105.6W |
Efficiency | 76% | 78% | 80% | 81% | 83% | 84% |
Adjustable range for DC voltage | +10% | +10% | +10% | +10% | +10% | +10% |
AC input voltage range | 85-132VAC /176~264VAC selected by swich 47~63Hz;248~370VDC | |||||
Input current | 2A/115V 1A/230A | |||||
AC INnrush current | Cold-start current30A/115V 60A/230V | |||||
Leakage current | <1mA/240VAC | |||||
Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||
Over-voltage protection | 115%-135 | |||||
High-temperature protection | ………… | |||||
Temperature coefficient | ±0.03%/℃(0-50℃) | |||||
Setup rise hold up time | 1s,30ms,15ms | |||||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||||
Store temperature and humidity | -20℃~+85℃。10%~95%RH | |||||
Overall dimension | 199×98×38mm | |||||
Weight | 0.65Kgs | |||||
Safety standards | UL1012 TUV EN6050(IEC950,UL1950)Approved | |||||
EMC standards | CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||||
Note: 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.C2、3、6must be knocked down. |
Model Specification | SP-100-5 | SP-100-7.5 | SP-100-12 | SP-100-15 | SP-100-24 | SP-100-48 |
DC output voltage | 5V | 7.5V | 12V | 15V | 24V | 48V |
Output voltage error(Note:2) | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% |
Rated output current | 20A | 13.5A | 8.5 | 6.7A | 4.5A | 2.2A |
Output current rage | 0-20A | 0-13.5A | 0-8.5 | 0-6.7A | 0-4.5A | 0-2.2A |
Wave and noise(Note:3) | 100mVp-p | 125mVp-p | 125mVp-p | 125mVp-p | 150mVp-p | 150mVp-p |
Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stablity (Note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
DC output power | 100W | 101W | 102W | 100.5W | 108W | 105.6W |
Efficiency | 76% | 78% | 80% | 81% | 83% | 84% |
Adjustable range for DC voltage | +10% | +10% | +10% | +10% | +10% | +10% |
AC input voltage range | 85-132VAC /176~264VAC selected by swich 47~63Hz;248~370VDC | |||||
Input current | 2A/115V 1A/230A | |||||
AC INnrush current | Cold-start current30A/115V 60A/230V | |||||
Leakage current | <1mA/240VAC | |||||
Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||
Over-voltage protection | 115%-135 | |||||
High-temperature protection | ………… | |||||
Temperature coefficient | ±0.03%/℃(0-50℃) | |||||
Setup rise hold up time | 1s,30ms,15ms | |||||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||||
Store temperature and humidity | -20℃~+85℃。10%~95%RH | |||||
Overall dimension | 199×98×38mm | |||||
Weight | 0.65Kgs | |||||
Safety standards | UL1012 TUV EN6050(IEC950,UL1950)Approved | |||||
EMC standards | CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||||
Note: 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.C2、3、6must be knocked down. |