S-60
Winston
Made in China
Export standard carton box
PCS
10
3-7days
1
T/T
Model | S-60-5 | S-60-12 | S-60-15 | S-60-24 |
---|---|---|---|---|
Specification | ||||
DC output voltage | 5V | 12V | 15V | 24V |
Output voltage error(Note:2) | ±2% | ±1% | ±1% | ±1% |
Rated output current | 12A | 5A | 4A | 2.5A |
Output current rage | 0-12A | 0-5A | 0-4A | 0-2.5A |
Wave and noise(Note:3) | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p |
Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stablity (Note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% |
DC output power | 60W | 60W | 60W | 40W |
Efficiency | 72% | 76% | 77% | 79% |
Adjustable range for DC voltage | +10,-5% | +10% | +10% | +10% |
AC input voltage range | 85-264VAC 47-63Hz;120-370VDC | |||
Input current | 2A/115V 60A/230V | |||
AC INnrush current | Cold-start current 30A/115V 60A/230V | |||
Leakage current | <3.5mA/240VAC | |||
Overload proctection | 105%~150% Tpye:pulsing hiccp shutdown Reset:auto recovery | |||
Over-voltage protection | 115%~135% | |||
High-temperature protection | ………… | |||
Temperature coefficient | ±0.03%/℃(0~50%) | |||
Setup rise hold up time | 100%ms,50ms,10ms/115V 300ms,50ms,80ms/230VAC | |||
Vibration | 10-500HZ,2G 10min,/1cycle,Period for 60min,Each axes | |||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||
Store temperature and humidity | -20℃~+85℃,10%~95%RH | |||
Overall dimension | 159×97×38mm | |||
Weight | 0.55Kgs | |||
Safety standards | UL1012 TUV EN6050(IEC,UL1950)Approved | |||
EMC standards | CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||
Note: 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.C2、3、6 must be knocked down. |
Model | S-60-5 | S-60-12 | S-60-15 | S-60-24 |
---|---|---|---|---|
Specification | ||||
DC output voltage | 5V | 12V | 15V | 24V |
Output voltage error(Note:2) | ±2% | ±1% | ±1% | ±1% |
Rated output current | 12A | 5A | 4A | 2.5A |
Output current rage | 0-12A | 0-5A | 0-4A | 0-2.5A |
Wave and noise(Note:3) | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p |
Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stablity (Note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% |
DC output power | 60W | 60W | 60W | 40W |
Efficiency | 72% | 76% | 77% | 79% |
Adjustable range for DC voltage | +10,-5% | +10% | +10% | +10% |
AC input voltage range | 85-264VAC 47-63Hz;120-370VDC | |||
Input current | 2A/115V 60A/230V | |||
AC INnrush current | Cold-start current 30A/115V 60A/230V | |||
Leakage current | <3.5mA/240VAC | |||
Overload proctection | 105%~150% Tpye:pulsing hiccp shutdown Reset:auto recovery | |||
Over-voltage protection | 115%~135% | |||
High-temperature protection | ………… | |||
Temperature coefficient | ±0.03%/℃(0~50%) | |||
Setup rise hold up time | 100%ms,50ms,10ms/115V 300ms,50ms,80ms/230VAC | |||
Vibration | 10-500HZ,2G 10min,/1cycle,Period for 60min,Each axes | |||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||
Store temperature and humidity | -20℃~+85℃,10%~95%RH | |||
Overall dimension | 159×97×38mm | |||
Weight | 0.55Kgs | |||
Safety standards | UL1012 TUV EN6050(IEC,UL1950)Approved | |||
EMC standards | CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||
Note: 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.C2、3、6 must be knocked down. |