FF018 Filter Fan

 

                                                                                                                                                                                         

Technical Data

Axial fan, ball bearing                service life 50,000h at 25°C / 77°F (65% RH)                                fan body aluminium, rotor plastic                Connection                2 wires with pressure clamps 2.5mm⊃2;, length 100mm                Casing (filter fan and exit filter)                plastic according to UL94 V-0, light grey                Hood (filter fan and exit filter)                plastic according to UL94 V-0, light grey;                                weather proof and UV light resistant according to UL746C (f1)                Mounting frame                with double-sided industrial adhesive band for fixing to the                                outside of enclosure; certain operating circumstances can                                make the additional use of screws necessary (see drilling                                template); a template for the enclosure cut-out is included in the                                delivery of the filter fans                Filter mat                G4 acc. to DIN EN 779, filtering degree 94%                Filter material                synthetic fibre with progressive construction; temperature                                resistant to 100°C, self-extinguishing class F1,                                moisture resistant to 100% RH, reusable - cleaning by                                washing or vacuuming                Operating/Storage temperature                -10 to +70°C (+14 to +158°F) / -40 to +70°C (-40 to +158°F)                Operating/Storage humidity                max. 90% RH (non-condensing)                Protection type/Protection class                IP55 / I (earthed)

Special features        The self-adhesive seal of the mounting frame prevents dust and water from entering the cabinet.Functional designof the intake and exit fan hoods very effectively prevents direct intrusion of falling water and dust. The advantage is that the filter mat does not get so quickly contaminated with dirt and thus does not need to be exchanged so often.The air channeling makes the filter fan particularly quiet in operation.Functional and modern designenables time-saving assembly and maintenance.        The direction of air flow can easily be switched by reversing the axial fan (sizes 1 to 3).        EMC versions and other voltages on request.

Time-saving assembly and maintenance        ´s filter fans are easily installed by one person from outside the cabinet. 1.) Make cut-out in the cabinet wall. The cut edge of the cabinet opening should be free of dirt, filings and grease. A template for the enclosure cut-out is included in the delivery of the filter fan. 2.) Remove protective film from the sealing strips on the mounting frame. Press mounting frame into the cabinet opening. The frame stays permanently in the cabinet. (For size 176mm and up we recommend additional screw fixing.) 3.) Electrically connect the axial fan using the clip connectors. Push the unit into the mounting frame. Fix using screws. 4.) Insert the filter mat in the hood. Clip on. Finished. Changing the filter mat or fan is quickly done by one person. To change the filter mat simply remove the filter hood, insert the new mat and snap the hood back again. No tools required. Maintenance of the fan can easily be done without removing the mounting frame (2).

Exit Filter EF 118 Series

Art. No.                Depth in enclosure                Enclosure cut-out                Weight (approx.)                Filter mat                Protection type                11800.0-00                16mm                97 x 97mm + 0.4                0.3kg                G4 acc. to DIN EN 779, filtering degree 94%                IP55                11801.0-00                16mm                125 x 125mm + 0.4                0.4kg                G4 acc. to DIN EN 779, filtering degree 94%                IP55                11802.0-00                16mm                176 x 176mm + 0.4                0.6kg                G4 acc. to DIN EN 779, filtering degree 94%                IP55

Filter Mat FM 086

Filter mat                89 x 89mm                118 x 118mm                168 x 168mm                G4 (1 packaging unit = 3 pcs.)                Art. No. 08600.0-00                Art. No. 08601.0-00                Art. No. 08602.0-00

Technical drawing