AC contactor belongs to modular controlling electrical equipment,which has novelty structure,compact size ,it is DIN-RAIL for installation,size of modular,modeling artistic.use of safety,direct acting inversion.And,it can install in the distribution boards along with breakers.
Conditions of Working & Installations
Temperature: 5℃~+40℃,AVG not over within 24h+35℃ Altitude: not over 2000m. Atmospheric conditions: RH+40℃ not over 50% under,RH can be for 90% under +20℃, In dewing,it should be taken special precautious. Class of pollution: 2 Installation type: II Mode of installations: TH35-7.5 types steel DIN-RAIL IP Grade: IP20
Attention 1. Confirm whether the product voltage, current, frequency and use category meet the requirements before use; 2. Connect the control circuit first for no-load operation test and then connect the load in case of no abnormality; 3. Regularly tighten the terminals and remove the deposited dust; 4. Don't make the foreign matters fall into the product
Application
AC contactor belongs to modular controlling electrical equipment,which has novelty structure,compact size ,it is DIN-RAIL for installation,size of modular,modeling artistic.use of safety,direct acting inversion.And,it can install in the distribution boards along with breakers.
Conditions of Working & Installations
Temperature: 5℃~+40℃,AVG not over within 24h+35℃ Altitude: not over 2000m. Atmospheric conditions: RH+40℃ not over 50% under,RH can be for 90% under +20℃, In dewing,it should be taken special precautious. Class of pollution: 2 Installation type: II Mode of installations: TH35-7.5 types steel DIN-RAIL IP Grade: IP20
Attention 1. Confirm whether the product voltage, current, frequency and use category meet the requirements before use; 2. Connect the control circuit first for no-load operation test and then connect the load in case of no abnormality; 3. Regularly tighten the terminals and remove the deposited dust; 4. Don't make the foreign matters fall into the product
