- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
loading
UB400-12GM-E5-V1
CE
WINSTON
MADE IN CHINA
EXPORT STANDARD CARTON BOX
PCS
1
WITHIN 6DAYS AFTER GET PAYMENT
6
T/T
Brife introduction of ultrasonic sensor
Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may affect the sensors. Objects consisting of a variety of materials can be detected to within millimeters regardless of color or shape.
The ultrasonic sensor produces a data carrier utilizing very high frequencies that are outside the human’s audible range. The time it takes for that ultrasonic wave to pass between the sensor and the object is the value for the distance or the position.
Ultrasonic sensors have proven their reliability and precision in many industries and applications, including:
Brife introduction of ultrasonic sensor
Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may affect the sensors. Objects consisting of a variety of materials can be detected to within millimeters regardless of color or shape.
The ultrasonic sensor produces a data carrier utilizing very high frequencies that are outside the human’s audible range. The time it takes for that ultrasonic wave to pass between the sensor and the object is the value for the distance or the position.
Ultrasonic sensors have proven their reliability and precision in many industries and applications, including:
| data |
| General Specifications |
| Sensing distance: 30…400mm |
| Adjustment range: 50…400mm |
| Unusable area: 0…30mm |
| Standard target plate: 100mm×100mm |
| Transducer frequency: About 310 kHz |
| Response delay: About 50ms |
| Indicators/Operating means |
| LED blue Power on |
| LED yellow indication of the switching state Flashing:program function object detected |
| LED red permanently red: Error |
| Electrical specifications |
| Operating voltage UB10…30VDC,ripple10%ss |
| No-load supply current: ≤30mA |
| Input |
| Input type 1 TEACH-IN input Operating distance, A1:-UB…+1V,operating distanceA2:+6… + UB Input impedance:>4.7KΩ TEACH-IN programmable pulse :≥1S |
| Output |
| Output type : 1 switch output E5, PNP NO/NC, programmable |
| Rated operational current 100mA,Short circuit/overload protected |
| Default setting switch point A1:70mm Switch point A2:800mm |
| Repeat accuracy : ±0.1% of full-scale value |
| Voltage drop ≤ 3 V |
| switching frequency ≤ 8Hz |
| Range hysteresis 1% of the set operating distance |
| Temperature influence: ±1.5% of full-scale value |
| Ambient conditions |
| Ambient temperature: -25…70°C(-13 ... 158 °F) |
| Storage temperature: -40…85°C(-40 ... 185 °F) |
| Mechanical specifications
|
| Protection grade: IP67 |
| Connection: V1 Connector M12x1,4-PIN |
| Material Housing: brass,nickel-plated |
| Transducer epoxy resin/hollow glass sphere mixture; Polyurethane foam |
| Weight 25g |
| Compliance with standards and di |
| standard conformity EN60947-5-2:2007 IEC60947-5-2:2007 |
Dimensions
| TEACH-IN window mode,normally-open function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Set target to far switching point -TEACH-IN switching point A2 with + UB | ||
| TEACH-IN window mode,normally-closed function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Set target to far switching point -TEACH-IN switching point A1 with - UB | ||
| TEACH-IN switching point, normally-open function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB | ||
| TEACH-IN switching point, normally-closed function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A2 with + UB | ||
| TEACH-IN detection of objects presence -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB -TEACH-IN switching point A2 with + UB | ||
| Default setting of switching point A1=blind range,A2=nominal distance | ||
| LED displays | ||
| Displays in dependence on operating mode | Red LED | Yellow LED |
| TEACH-IN switching point Object detected No object detected Object uncertain(TEACH-IN invalid) |
off flashes On |
flashes off off |
| Normal operation | off | Switching state |
| Fault on Previous state | ||
Pinout
| data |
| General Specifications |
| Sensing distance: 30…400mm |
| Adjustment range: 50…400mm |
| Unusable area: 0…30mm |
| Standard target plate: 100mm×100mm |
| Transducer frequency: About 310 kHz |
| Response delay: About 50ms |
| Indicators/Operating means |
| LED blue Power on |
| LED yellow indication of the switching state Flashing:program function object detected |
| LED red permanently red: Error |
| Electrical specifications |
| Operating voltage UB10…30VDC,ripple10%ss |
| No-load supply current: ≤30mA |
| Input |
| Input type 1 TEACH-IN input Operating distance, A1:-UB…+1V,operating distanceA2:+6… + UB Input impedance:>4.7KΩ TEACH-IN programmable pulse :≥1S |
| Output |
| Output type : 1 switch output E5, PNP NO/NC, programmable |
| Rated operational current 100mA,Short circuit/overload protected |
| Default setting switch point A1:70mm Switch point A2:800mm |
| Repeat accuracy : ±0.1% of full-scale value |
| Voltage drop ≤ 3 V |
| switching frequency ≤ 8Hz |
| Range hysteresis 1% of the set operating distance |
| Temperature influence: ±1.5% of full-scale value |
| Ambient conditions |
| Ambient temperature: -25…70°C(-13 ... 158 °F) |
| Storage temperature: -40…85°C(-40 ... 185 °F) |
| Mechanical specifications
|
| Protection grade: IP67 |
| Connection: V1 Connector M12x1,4-PIN |
| Material Housing: brass,nickel-plated |
| Transducer epoxy resin/hollow glass sphere mixture; Polyurethane foam |
| Weight 25g |
| Compliance with standards and di |
| standard conformity EN60947-5-2:2007 IEC60947-5-2:2007 |
Dimensions
| TEACH-IN window mode,normally-open function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Set target to far switching point -TEACH-IN switching point A2 with + UB | ||
| TEACH-IN window mode,normally-closed function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Set target to far switching point -TEACH-IN switching point A1 with - UB | ||
| TEACH-IN switching point, normally-open function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB | ||
| TEACH-IN switching point, normally-closed function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A2 with + UB | ||
| TEACH-IN detection of objects presence -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB -TEACH-IN switching point A2 with + UB | ||
| Default setting of switching point A1=blind range,A2=nominal distance | ||
| LED displays | ||
| Displays in dependence on operating mode | Red LED | Yellow LED |
| TEACH-IN switching point Object detected No object detected Object uncertain(TEACH-IN invalid) |
off flashes On |
flashes off off |
| Normal operation | off | Switching state |
| Fault on Previous state | ||
Pinout
