High degree of protection Good drainage performance Easy to install Robust, weather and UV-light protected housing Condensate occurs in enclosures and housings with high protection type by variations in temperature. The use of a drainage device allows the conveying of the condensate without loosing the maximum protection type of IP66. The water permeable membrane makes sure the drainage of the enclosure by the capillary attraction. The construction prevents the infiltration of splash water into the enclosure.
Drainage Device DD 084 IP66 / IP67 / IP69K
High degree of protection Good drainage performance Easy to install Robust, weather and UV-light protected housing Condensate occurs in enclosures and housings with high protection type by variations in temperature. The use of a drainage device allows the conveying of the condensate without loosing the maximum protection type of IP66. The water permeable membrane makes sure the drainage of the enclosure by the capillary attraction. The construction prevents the infiltration of splash water into the enclosure.
Technical Data
Mounting
thread M50 x 1.5 with nut (wrench size 60mm, housing 50mm)
orque
6Nm max.
Depth in enclosure
max. 17.5mm
Material
plastic according to UL94 V-0, umbra grey, weather proof and UV light resistant according UL746C (f1)
Water entry hight
0mm (at 0.5mm wall thickness)
Sealing
sealing gasket NBR
Water flow-though
approx. 200ml/h at a water column of 5mm
Dimensions
Ø 60 x 49.5mm
Fitting position
vertical, lowest point
Operating / Storage temperature
-45 to +70°C (-49 to +158°F)
Installation Make cut-out Ø 50.5+0.5mm in enclosure bottom and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure and the hole is free of burrs.
Art. No.
Protection type
Enclosure wall thickness
1 package unit
Weight (approx.)
08410.0-00
IP66 / IP67 (EN 60529) / IP69K (EN 40050-9)
0.5 - 5.5mm
1 piece
60g
Technical drawing
Technical Data
Mounting
thread M50 x 1.5 with nut (wrench size 60mm, housing 50mm)
orque
6Nm max.
Depth in enclosure
max. 17.5mm
Material
plastic according to UL94 V-0, umbra grey, weather proof and UV light resistant according UL746C (f1)
Water entry hight
0mm (at 0.5mm wall thickness)
Sealing
sealing gasket NBR
Water flow-though
approx. 200ml/h at a water column of 5mm
Dimensions
Ø 60 x 49.5mm
Fitting position
vertical, lowest point
Operating / Storage temperature
-45 to +70°C (-49 to +158°F)
Installation Make cut-out Ø 50.5+0.5mm in enclosure bottom and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure and the hole is free of burrs.
